Introduction for Roller conveyor shot blasting machine
Roller pass type shot blasting machine can clean steel plate and square steel, flat steel, steel plate and various structural parts with reasonable size at one time. It can not only remove the rust on the surface of the workpiece, clean up the welding slag on the structural parts, but also eliminate the welding stress of the workpiece, improve the fatigue strength of the workpiece, increase the adhesion of the paint film when the workpiece is painted, and finally improve the surface and intrinsic quality the goal of.。
Feature for roller conveyor shot blasting machine
The arrangement of the shot blasting chamber body and shot blasting device are determined after computer 3D dynamic shot simulation. The use of (Q034Z) high shot speed and large shot blasting centrifugal shot blasters can significantly improve the cleaning efficiency of the shot blasting machine and achieve satisfactory cleaning quality. 1. The shot slag separator uses the current good flow curtain full screen curtain slag separator, which greatly improves the separation amount, separation efficiency and shot blasting quality, and reduces the wear on the shot blasting device. The separator has a separation diameter of 0.8 to 3.0. The separation efficiency is ≥99%. , Has a good separation effect and high productivity, greatly improving the blade life. 2. The dust collector adopts the better domestic cyclone + pulse filter type dust removal technology. The dust emission concentration is lower than the national standard, which improves the operating environment. 6.Can use PLC automatic control or manual control 4.3D disign and plasma cutting
Application scope for Roller conveyor shot blasting machine
Steel structure shot blasting machine and profile shot blasting machine are mainly used for steel plate, metal structure machine bed, steel (cast iron) products, grids, construction machinery and bridge manufacturing. Steel structure shot blasting machine and section shot blasting machine can The surface of the steel in the original state is subjected to strong shot blasting to remove the rust layer and scale on it, so as to obtain a uniform metallic luster, so as to improve the coating quality and anticorrosive effect of the steel.